echo "Try accessing this AO from either localhost, 127.0.0.1, or ${domain}"
;;
esac
if [ "$anywhere" -eq 1 ]; then
ACCESS_POINT=http://localhost
else
ACCESS_POINT=https://$domain
fi
}
check_ports() {
install_if_needed nmap
nmap -Pn $domain > nmap.txt
OPEN=1
if grep -qE "^80/.*(open|filtered)" nmap.txt; then
echo -e "I can see port ${GREEN}80${RESET}!"
else
echo -e "Uh oh, port ${RED}80${RESET} isn't showing up..."
OPEN=0
fi
if grep -qE "^443/.*(open|filtered)" nmap.txt; then
echo -e "I can see port ${GREEN}443${RESET} as well!"
else
echo -e "Uh oh, port ${RED}443${RESET} isn't showing up..."
OPEN=0
fi
rm nmap.txt
echo ""
if [[ $OPEN -eq 0 ]]; then
echo -e "${RED}Port configuration needed.${RESET} Something (probably your wireless router) is blocking us from serving this page to the rest of the internet."
echo "Port forwarding is relatively simple, but as it stands it is beyond the scope of this script to be able to automate it."
echo -e "You'll probably need to look up the login information for your specific router and forward the red ports to the local IP of this computer (${BOLD}$(ip route | grep default | grep -oP "(?<=src )[^ ]+")${RESET})."
echo -e "You can log into your router at this IP address: ${BOLD}$(route -n | grep ^0.0.0.0 | awk '{print $2}')${RESET}"
echo "That's all the help I can give you regarding port forwarding. Good luck!"
# Script for installing the base dependencies of AO and getting it running
# Bare Metal Alchemist, 2022
@ -64,13 +64,16 @@ case $DISTRO in
;;
esac
echo""
#
## ------------------- Step 2 - AO Environment Setup -------------------
#
AO=''
echo -e "${BOLD}Hey!${RESET} I was wondering which ${BLUE}version of AO${RESET} you wanted to install. \n"
echo -e "${BOLD}1.${RESET} ao-3 (Vue)"
echo -e "${BOLD}2.${RESET} ao-react (React)"
# ------------------- Step 2 - AO Environment Setup -------------------
if[ -z $AO];then
AO=''
echo -e "${BOLD}Hey!${RESET} I was wondering which ${BLUE}version of AO${RESET} you wanted to install. \n"
echo -e "${BOLD}1.${RESET} ao-3 (Vue)"
echo -e "${BOLD}2.${RESET} ao-react (React)"
fi
while[[ -z $AO]];do
echo -en "${BLUE}(number):${RESET}"
read -n1 ao_select
@ -79,11 +82,11 @@ while [[ -z $AO ]]; do
case$ao_select in
"1")
echo"Minimalism, I like it! Proceeding with ao-3 installation"
echo"Minimalism, I like it! Proceeding with ${BLUE}ao-3${RESET} installation"
AO=3
;;
"2")
echo"It's got community! Proceeding with ao-react installation"
echo-e "It's got community! Proceeding with ${BLUE}ao-react${RESET} installation"
AO=react
;;
*)
@ -91,27 +94,20 @@ while [[ -z $AO ]]; do
;;
esac
done;
echo"AO=${AO}" >> .env
echo""
remember "AO=${AO}"
echo""
if[$AO="3"]||[$AO='react'];then
echo -e "${BOLD}Installing Node.js${RESET}"
chmod +x scripts/nvm_install.sh
scripts/nvm_install.sh
exportNVM_DIR="$HOME/.nvm"
[ -s "$NVM_DIR/nvm.sh"]&&\."$NVM_DIR/nvm.sh"# This loads nvm
[ -s "$NVM_DIR/bash_completion"]&&\."$NVM_DIR/bash_completion"# This loads nvm bash_completion
if["$SHELL"='/bin/zsh'];then
echo'sourcing zshrc'
source ~/.zshrc
if ! check_exists nvm;then
install_nvm
else
source ~/.bashrc
echo -e "${BLUE}Node${RESET} already installed"
echo""
fi
nvm install v16.13.0
nvm alias default v16.13.0
nvm use default
echo"Setting Node to v16.13.0 for compatibility"
set_node_to v16.13.0
echo -e "${GREEN}Done!${RESET}"
fi
if[$AO="3"]||[$AO='react'];then
@ -151,6 +147,7 @@ else
node scripts/createPrivateKey.js >> $HOME/.ao/key
echo -e "Just made a fresh private key and put it in ${GREEN}~/.ao${RESET}"
fi
echo""
# TODO this is really janky/fragile, it would be better to store this in ~/.ao
CONFIG_FILE=$HOME/ao-$AO/configuration.js
@ -384,32 +381,7 @@ sudo systemctl start nginx
echo""
echo -e "${BOLD}One more thing!${RESET} We need to make sure that your ports are open."
install_if_needed nmap
nmap -Pn $domain > nmap.txt
OPEN=1
if grep -qE "^80/.*(open|filtered)" nmap.txt;then
echo -e "I can see port ${GREEN}80${RESET}!"
else
echo -e "Uh oh, port ${RED}80${RESET} isn't showing up..."
OPEN=0
fi
if grep -qE "^443/.*(open|filtered)" nmap.txt;then
echo -e "I can see port ${GREEN}443${RESET} as well!"
else
echo -e "Uh oh, port ${RED}443${RESET} isn't showing up..."
OPEN=0
fi
rm nmap.txt
echo""
if[[$OPEN -eq 0]];then
echo -e "${RED}Port configuration needed.${RESET} Something (probably your wireless router) is blocking us from serving this page to the rest of the internet."
echo"Port forwarding is relatively simple, but as it stands it is beyond the scope of this script to be able to automate it."
echo -e "You'll probably need to look up the login information for your specific router and forward the red ports to the local IP of this computer (${BOLD}$(ip route | grep default | grep -oP "(?<=src )[^ ]+")${RESET})."
echo -e "You can log into your router at this IP address: ${BOLD}$(route -n | grep ^0.0.0.0 | awk '{print $2}')${RESET}"
echo"That's all the help I can give you regarding port forwarding. Good luck!"
echo""
fi
check_ports
# ------------------- Step 9 - Health Check -------------------
